Live Sync bởi Ulpio
Cuts the delay on YouTube live streams. It measures how far behind the live edge you are and speeds the player up just enough to catch up, then returns to 1.00x. Five modes, from gentle to minimum latency. No data collected.
Thử nghiệmThử nghiệm
Siêu dữ liệu mở rộng
Về tiện ích mở rộng này
Learning the result from chat before you see it on screen is annoying. Live Sync fixes that without you dragging the progress bar every few minutes.
HOW IT WORKS
The extension continuously measures the gap between what you are watching and the live edge. When that gap exceeds your target, it raises playback speed slightly until it catches up, then drops back to 1.00x on its own.
Two ways to catch up:
Smooth: speed scales with the size of the delay, almost always between 1.03x and 1.15x. You will not notice it.
Burst: applies a fixed speed (1.25x by default) until the gap is gone.
When the delay is too large to be worth recovering by speeding up, the extension jumps straight to the live edge instead.
MODES
Gentle — 6 s target, 1.07x cap. For shaky connections.
Balanced — 2.5 s target, 1.15x cap. The default.
Minimum latency — 1 s target, 1.30x cap.
Auto — tracks stalls and buffer health and adapts on its own: a struggling connection loosens the target, a stable one tightens toward the live edge.
Manual — you set target latency, maximum speed, burst speed and the jump threshold.
WHAT IT DOES NOT DO
Much of the work is knowing when to stay out of the way:
It stands down during ads.
It will not speed up on a short buffer, since doing that only causes stalls.
If you deliberately seek backwards to rewatch something, syncing pauses until you return near the live edge.
If you pick a different speed in the YouTube menu, that becomes the baseline and the correction applies on top of it instead of overriding your choice.
EXTRAS
Optional on-player readout with latency, speed and buffer.
The same live numbers in the popup.
Shortcuts: Alt+Shift+L jumps to live, Alt+Shift+K toggles the extension.
Works in embedded YouTube players too.
PRIVACY
No data leaves your browser. No telemetry, no servers, no remote code. Settings stay on your machine. The requested permissions are storage, activeTab and access to youtube.com and youtube-nocookie.com, which is where the extension needs to run.
LIMITATIONS
Streams on normal latency (not "low" or "ultra-low") have a delay floor set by YouTube itself. On those, very short targets may be unreachable and Gentle or Auto behaves better. Speeding audio up also shifts its timbre a little; pitch correction is on, but at 1.30x it is still noticeable.
HOW IT WORKS
The extension continuously measures the gap between what you are watching and the live edge. When that gap exceeds your target, it raises playback speed slightly until it catches up, then drops back to 1.00x on its own.
Two ways to catch up:
Smooth: speed scales with the size of the delay, almost always between 1.03x and 1.15x. You will not notice it.
Burst: applies a fixed speed (1.25x by default) until the gap is gone.
When the delay is too large to be worth recovering by speeding up, the extension jumps straight to the live edge instead.
MODES
Gentle — 6 s target, 1.07x cap. For shaky connections.
Balanced — 2.5 s target, 1.15x cap. The default.
Minimum latency — 1 s target, 1.30x cap.
Auto — tracks stalls and buffer health and adapts on its own: a struggling connection loosens the target, a stable one tightens toward the live edge.
Manual — you set target latency, maximum speed, burst speed and the jump threshold.
WHAT IT DOES NOT DO
Much of the work is knowing when to stay out of the way:
It stands down during ads.
It will not speed up on a short buffer, since doing that only causes stalls.
If you deliberately seek backwards to rewatch something, syncing pauses until you return near the live edge.
If you pick a different speed in the YouTube menu, that becomes the baseline and the correction applies on top of it instead of overriding your choice.
EXTRAS
Optional on-player readout with latency, speed and buffer.
The same live numbers in the popup.
Shortcuts: Alt+Shift+L jumps to live, Alt+Shift+K toggles the extension.
Works in embedded YouTube players too.
PRIVACY
No data leaves your browser. No telemetry, no servers, no remote code. Settings stay on your machine. The requested permissions are storage, activeTab and access to youtube.com and youtube-nocookie.com, which is where the extension needs to run.
LIMITATIONS
Streams on normal latency (not "low" or "ultra-low") have a delay floor set by YouTube itself. On those, very short targets may be unreachable and Gentle or Auto behaves better. Speeding audio up also shifts its timbre a little; pitch correction is on, but at 1.30x it is still noticeable.
Được xếp hạng 0 (bởi 1 người dùng)
Quyền hạn và dữ liệu
Quyền hạn bắt buộc:
- Truy cập dữ liệu của bạn cho www.youtube.com
- Truy cập dữ liệu của bạn cho m.youtube.com
- Truy cập dữ liệu của bạn cho www.youtube-nocookie.com
Quyền hạn tùy chọn:
- Truy cập dữ liệu của bạn cho các trang web trong tên miền youtube.com
- Truy cập dữ liệu của bạn cho các trang web trong tên miền youtube-nocookie.com
Thu thập dữ liệu:
- Nhà phát triển cho biết tiện ích mở rộng này không yêu cầu thu thập dữ liệu.
Thêm thông tin
- Liên kết tiện ích
- Phiên bản
- 1.0.0
- Kích cỡ
- 20,16 KB
- Cập nhật gần nhất
- 5 ngày trước (17 Thg 08 2026)
- Thể loại có liên quan
- Giấy phép
- Giấy phép MIT
- Lịch sử các phiên bản
- Thêm vào bộ sưu tập