Add-on problem or Firefox issue? Puntuado con 4 de 5 estrellas

EDIT: I see thanks
Do you know if firefox devs already know this?

Anyhow I created a bug on bugzilla for it /show_bug. cgi?id=1178138 So if it's no t a known issue please drop by to get it more publicity.
___________________________________

I manually defined zoom intervals of 1% from 100 to over 400 but when i tested it the page size doesnt change on every tick of the zoom increase for example I increase it to 101 and it changes I increse it now to 102 but nothing happens I increase to 103 and it shows then later it skips higher % like 5 or 6% increases to notice a change. I tried with no squint and it has the same issue at the exact same zoom levels so I was wondering if this could be a firefox problem and if something could be done to catch their attention to fix it or if it's something intentional.

Este usuario tiene 2 valoraciones anteriores de este complemento.

Firefox issue

This is an issue with Firefox that was also encountered when developing Zoom Page. For example, if you zoom a page to 300%, and increase the zoom in 1% increments, there is no change in the size of the page contents until you reach 308%.

However, when viewing standalone images, all of the 1% increments do have an effect, since Zoom Page implements its own image zoom.

This is the one I was looking for Puntuado con 5 de 5 estrellas

I somehow found this sometime back and became rather dependent on it. Firefox (38.0.?) one day decided it needed to reinstall or rejuvenate or something itself and did so leaving me with no addons or way to find out what the old ones had been. I kept searching for variations of "resize" and finding nothing that worked as well as this. A moment of inspiration (and desperation) and I searched for zoom and here it is, back again. Absolute simplicity, with nothing more than + and - buttons. No resolution menu to choose from, it just makes the page bigger or smaller. Perfection for my purposes, typically something that won't fit or doing a screen capture and want to fit everything in. Thank you DW-dev. Two more of your addons I had to rediscover were Print Edit and Navigate Up. Great job on all these.

Esta valoración es de una versión anterior del complemento (13.6). 

Puntuado con 5 de 5 estrellas

EDIT: It seems like everything is back to normal thanks to the latest fix, so I changed my rating accordingly.
________________
This has become almost unusable for me after a recent update. Now, everytime a page has some additional content to load, the zoom gets reset. In some pages, just the act of zooming in triggers some refresh in the page and sends you back to 100%, which is infuriating.

The easiest example of this behavior is simply opening an image in a new tab and changing the zoom level before it's finished loading. Once it's completely loaded, it will reset to 100%.

Esta valoración es de una versión anterior del complemento (13.4). 

Fixed in Version 13.5

These issues are fixed in Zoom Page 13.5, which has been submited to Mozilla fror review and public release.

In the meantime, you can downloiad Zoom Page 13.5 here:
https://addons.mozilla.org/en-US/firefox/addon/zoom-page/versions/

hmm... guys... Puntuado con 5 de 5 estrellas

you fixed the zoom problem on "about:newtab" thank you very much 5 extra large stars to this add-on.

Esta valoración es de una versión anterior del complemento (13.4).  Este usuario tiene una valoración anterior de este complemento.

Puntuado con 4 de 5 estrellas

Can't remember specific zoom level on about:newtab (v13.4)

Esta valoración es de una versión anterior del complemento (13.4). 

Site-specific zoom works with "about:newtab" - but not with "about:blank"

Do you mean "about:newtab" or "about:blank" ?

Site-specific zoom does work with "about:newtab", but by design does not work with "about:blank".

Firefox loads many transient "about:blank" pages, which are never seen by the user. To apply site-specific zoom to all of these transient pages would be very inefficient, and Firefox's standard zoom functionality avoids doing this. Zoom Page takes the same approach.

Can't remember specific zoom level on about:newtab Puntuado con 4 de 5 estrellas

I have choose Default + Site Specific mode and disable "Use 100% for special pages (audio, video, about:, xul)" option, then I use the toolbar to set a diffrent zoom level on about:newtab, but fail to reopen the tab with the wanted result.

I have found if I use Ctrl+T or click Open New Tab button, the zoom level is set to default, while I manually enter about:newtab into address bar, the zoom level will be set to specific level.

Esta valoración es de una versión anterior del complemento (13.4). 

Site-specific zoom does work on about:newtab ...

This should work without any problem. As an example, try the following steps:

1. Set the Zoom Mode to "Default + Site-Specific (D/S)".
2. Set the Default Zoom Level to 120%.
3. Disable the "Use 100% for special pages ..." option.
4. Load the about:newtab page and the zoom level will be set to 120%.
5. Change the zoom level using the +/- buttons or drop-down menu to 80% (which will set the site-specific zoom for this site to 80%).
6. Load the about:newtab page in another tab and the zoom level will be set to 80% (because the site-specific zoom for this site is 80%).

If the "Use 100% for special pages ..." option was enabled in Step 3, the only difference would be that the zoom level would be set to 100% in Step 4. The zoom level in Step 6 would still be 80%, because site-specific zoom takes priority over the "Use 100% for special pages ..." option.

Puntuado con 5 de 5 estrellas

In 13.3 there's once again that bug with "NaN%" in fit-to-width mode (that was fixed before in the 10.8 version).

Esta valoración es de una versión anterior del complemento (13.3).  Este usuario tiene una valoración anterior de este complemento.

Fixed in Version 13.4

This problem is fixed in Zoom Page 13.4, which has been submitted to Mozilla for review and public release.

You can download Zoom Page 13.4 from: https://addons.mozilla.org/en-US/firefox/addon/zoom-page/versions/

A must have for everybody with bigger widescreens! Puntuado con 5 de 5 estrellas

Living in times with high resolution widescreens and still badly programmed webpages for ancient times i got tired to zoom each page and found this extension, so, this is great and works closely flawless!
will rate 4 stars cause it still doesn't fill my widescreen completely 100% of 24' Monitor, but way better than without on most sites...thank you!
Also works good on FF nightly 41, will not live anymore without this extension :-)

Thanks for responding!
You're right, increasing was the point, i wasn't sure about those options, but now it goes up to 170% and 200%, perfect, 5 Stars!

Esta valoración es de una versión anterior del complemento (13.2.1-signed). 

Try increasing the maximum fit-to-width zoom levels ...

Not sure why it doesn't completely fill the width of your 24" monitor.

Have you tried increasing the "Maximum [Half Screen]" and "Maximum [Full Screen]" zoom level settings in the "Fit-To-Width Zoom Levels (%)" section of the Options dialog?

Great extension Puntuado con 5 de 5 estrellas

I've had this extension for a while now, so it's about time I expressed my thanks to the developer. It's an extension I use now and then, and it hasn't really let me down when I have used it for the odd site that I need to adjust to my liking. Great also to see that it's still actively developed. Cheers.

Esta valoración es de una versión anterior del complemento (13.2.1-signed). 

Default Zoom Level Not working. Puntuado con 3 de 5 estrellas

The Default Zoom Level (%) function is not working, I have to manually set the zoom level for each website.

Esta valoración es de una versión anterior del complemento (13.2.1-signed). 

Please provide some more information ...

Please provide some more information. Which Zoom Mode are you using? Do you have to manually set the zoom level each time you open a new tab, or each time you load a new page?

The default (non-fit-to-width) zoom modes should work as follows ...

If the Zoom Mode option is set to Default (D/X), then whenever a new tab is opened the zoom level is set to the Default Zoom Level. If the zoom level is manually changed (e.g. using +/- buttons), then loading a new page in the same tab will not set the zoom level back to the Default Zoom Level.

If the Zoom Mode option is set to Default+Site-Specific (D/S), then whenever a new page is loaded the zoom level is set to the Default Zoom Level.

Puntuado con 5 de 5 estrellas

Can only give it 4 stars because it is missing some things. To get 5 stars add features that NoSquint has. Full and Text zoom simultaneously on sites and an exception list are the two main ones. Limiting zooming at the domain level is not always good enough. NS appears to be heading for the bit bucket.

Esta valoración es de una versión anterior del complemento (13.2.1-signed).  Este usuario tiene una valoración anterior de este complemento.

Try using the Text Minimum Zoom Level option ...

Zoom Page has a feature to stop text being zoomed so small that it becomes unreadable. This feature works with both manual zoom and fit-to-width zoom, when the zoom type is full-page.

The feature is configured using the Text Minimum Zoom Level option in the Options dialog. The Text Minimum Zoom Level can also be quickly changed by Shift+Click on a zoom value in the Zoom Menu.

The site-specfic zoom modes provide similar capabilities to having an exception list. As you say, site-specific zoom is performed at the website level, rather than the individual page level, and this is not going to change.

Puntuado con 5 de 5 estrellas

The fix works perfect in 13.2.
That's an occasion for thanking the team for this nice piece of work. It's when they are missing that important things do feel important... !

Esta valoración es de una versión anterior del complemento (13.2.1-signed). 

Does what it's supposed to Puntuado con 5 de 5 estrellas

Thanks for quickly fixing the bug in 13.1!

Esta valoración es de una versión anterior del complemento (13.1.1-signed). 

Fixed in Version 13.2

This problem is fixed in Zoom Page 13.2.

After firefox update to v. 38.0.1 Zoom Page doesn't work correctly Puntuado con 5 de 5 estrellas

Links in new tabs are being open with zoom 100% (default is 150%).

Esta valoración es de una versión anterior del complemento (13.1.1-signed). 

Fixed in Version 13.2

This problem is fixed in Zoom Page 13.2.

13.1 dont work Puntuado con 5 de 5 estrellas

13.0 good work 13.1 dont work

Esta valoración es de una versión anterior del complemento (13.1.1-signed). 

Fixed in Version 13.2

This problem is fixed in Zoom Page 13.2.

Back to 100% on tab switching Puntuado con 5 de 5 estrellas

As mentioned by the-trooper and Roland Spencer for some sites site-specific zoom settings are not remembered in version 13.1.
To reproduce: search for something in yandex.com and google.com. While results, that are opened from google.com do not revert zoom factor of google page, results on yandex go back to 100% zoom factor when opening any link.

Esta valoración es de una versión anterior del complemento (13.1.1-signed). 

Fixed in Version 13.2

This problem is fixed in Zoom Page 13.2.

Switch tab - back to 100% Puntuado con 5 de 5 estrellas

Another one here to report 13.1 bug when switching tabs.

Esta valoración es de una versión anterior del complemento (13.1.1-signed). 

Fixed in Version 13.2

This problem is fixed in Zoom Page 13.2.

Love Zoom Page! Puntuado con 5 de 5 estrellas

But also having problems with 13.1. Would like to revert to 13.0. Thanks.

Edit: Thanks for fixing so quickly!

Esta valoración es de una versión anterior del complemento (13.1.1-signed). 

Fixed in Version 13.2

This problem is fixed in Zoom Page 13.2.

Bug in version 13.1 Puntuado con 5 de 5 estrellas

I'm also experiencing bugs where the site specific settings are not being remembered. It acts like the special tabs with the 100% setting set. Specifically, a website loads at 100% (even though it has been previously set to 133%) I increase the zoom to 133%, switch to another tab, and when I switch back it is back down to 100%. So it is probably related to the special tabs code added to version 13.1

for everyone else having problems you can go back to version 13.0 by clicking version information at the bottom of the page, then clicking the 'see complete version history' link. that will give you a page with all the previous versions to install.

Esta valoración es de una versión anterior del complemento (13.1.1-signed). 

Fixed in Version 13.2

This problem is fixed in Zoom Page 13.2. As you guessed, the problem was caused by the new option to apply 100% zoom to special pages. This option now works correctly and is initially disabled.

fucking auto update 13,1 version sux Puntuado con 2 de 5 estrellas

plz download link old 13,0 version because
half hour try setting but not work fine
13,0 not problem .....

plz share the link NOW

Esta valoración es de una versión anterior del complemento (13.1.1-signed). 

Fixed in Version 13.2

This problem is fixed in Zoom Page 13.2.